- This topic has 6 replies, 3 voices, and was last updated 19 years ago by
.
-
Posts
-
hi
working in an aquarius WD63 that trips sometimes when door is closed or sometimes in mid cycle.tested heater seems ok carbbon brushes arcing sometimes what you think?Re: hotpoint aquarius washer/dryer WD63 tripping?
Insulation test the motor – probably the armature shorting. Qualtex ARM20 is the cheapest way to fix it. 😉
Hope that helps,
Steve.
Re: hotpoint aquarius washer/dryer WD63 tripping?
When door is closed before you even switch on? You can always isolate the motor by removing the motor plug and running machine. Door interlock and chafing motor wiring harness both common causes of this fault as well.
Jim.
Re: hotpoint aquarius washer/dryer WD63 tripping?
brought machine home to run in workshop but now running perfect and no sign of fault
Re: hotpoint aquarius washer/dryer WD63 tripping?
Has it got a GDA or an FHP motor? There is a small plate on the front of the FHP motor that rubs through the harness close to the plastic ties. Uplifting the machine may have moved a possible harness chafing fault temporarily. Would suggest a detailed examination of the whole of the motor wiring harness, also check where the harness is clipped to the cabinet.
Jim.
Re: hotpoint aquarius washer/dryer WD63 tripping?
fhp motor and your right.insulation bare in 2 wires.thanks for that .
can you recommend a meggar that is reasonably priced as i’m new to game.
- You must be logged in to reply to this topic.