Electrolux ESL6114 integrated dishwsher no wash pump op

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Electrolux ESL6114 integrated dishwsher no wash pump op

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 7, 2007 at 8:32 am #26430
    Simon46
    Participant

    Went to this integrated dishwasher PNC 911931003 s/no 34810096that has been installed in new flats. Not been used yet so connected water supply. Machine empties as normal when started. Fills but drain pump runs as well so as water going in gets pumped out. turn mechanical timer to next position fills then heater runs boiling water. no hum from wash pump on any setting. No supply to cap either. Does this sound like the timer? appliance looks like 2003 manufacture 😕 .

    Regards
    Simon.

    May 26, 2007 at 11:05 am #210132
    Simon46
    Participant

    Re: Electrolux ESL6114 integrated dishwsher no wash pump op

    Would EMW repair/test these timers does anyone know? Got a feeling its been turned backwards. Or info on circuit would help. Not the usual IWMS diaphragm inlet valve as far as i could see.

    Regards
    S.

    June 4, 2007 at 5:51 pm #210133
    Simon46
    Participant

    Re: Electrolux ESL6114 integrated dishwsher no wash pump op

    Bonus. 3 microfarad cap gone on this cheap and nasty looking circulation pump.

    S.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.