Indesit IS60V T/D

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Indesit IS60V T/D

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 17, 2007 at 9:40 am #26663
    senseib
    Participant

    Just got this m/c in – belt needs changing, so got a 9phe 1860 belt, cannot for the life of me get it to stretch on to the motor pulley. Normally would have put longer screws into motor bracket and stretch it down by tightening, cant do that on this model as bracket slots in at one end 😈

    Any suggestions ❗

    April 17, 2007 at 10:29 am #210969
    iadom
    Moderator

    Re: Indesit IS60V T/D

    Buy the special tool, it makes this a 15 minute job, an absolute doddle.

    Loads of posts on the subject such as this one.
    http://tinyurl.com/225f4g

    Jim.

    April 17, 2007 at 10:59 am #210970
    senseib
    Participant

    Re: Indesit IS60V T/D

    Thanks Jim for your advise – do you know the part no of this tool?

    Brian.

    April 17, 2007 at 4:19 pm #210971
    iadom
    Moderator

    Re: Indesit IS60V T/D

    Its right at the end of that thread. 5600266.

    Jim.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.