- This topic has 4 replies, 3 voices, and was last updated 18 years, 11 months ago by
.
-
Posts
-
I am not a DIY person (can manage to change a light bulb thats about it!)
Recently inherited a WQP12-6015 fitted dishwasher when I moved to a new flat but the unit door was broken off, I have ordered two new pothooks from Necht (who took ages to deliver by the way!) and a user manual, the manual is useless does anyone have any guideline on how to fix the door to the washer, I have attached the pothooks to the external pane but I can’t see how to get it to fix to the dishwasher door itelf.
TIA
Jonathan
Re: Fixing the Door on a WQP12-6015
This job is a nightmare so unless you want loads of hassle stop now – there is a problem with this range of dishwasher and their door hinges. This is usually caused by the tension to the door not being set correctly on installation and quite often causes the whole of the cabinet to be distorted. To allow you access to the door hinge mechanism you have to take both side panels off which then gives you an insight into the way the tension cable, spring and hinge fits. If at this point you find damage don’t go any further. If all looks OK I suggest you change both hinges and retension the cable. Good Luck
Re: Fixing the Door on a WQP12-6015
I’m a great believer in letting people find out for themselves how much quality they have inherited 😀 Whilst Im on about quality you may call me Ian – Chris :worthy:
- You must be logged in to reply to this topic.