LG Dishwasher LD12BS6

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › LG Dishwasher LD12BS6

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 24, 2007 at 12:42 pm #26849
    Alanj
    Participant

    Hi Guys,
    went to this appliance today 0E error code.When you choose a program it just pumps out in intermittent pulses, it does not attempt to take in water.
    Base is dry, no pressure switch visible, heater ok. Any ideas? Module?

    0E = blockage, clean filters. It pumps out all water ok.

    Alan

    April 24, 2007 at 12:54 pm #211601
    admin
    Keymaster

    Re: LG Dishwasher LD12BS6

    Hi Alan

    there is a switch on the base of the sump that causes problems and also if i remember rightly these models should have been modified,PCB’s not normally a problem though.

    Bryan

    April 24, 2007 at 4:22 pm #211602
    Alanj
    Participant

    Re: LG Dishwasher LD12BS6

    Hi Byan,

    there looked to be a solenoid under the sump which I took to be for diverting water for half load.Is there a switch on that?

    Alan

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.