Beko WMA1715S

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko WMA1715S

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 26, 2007 at 9:08 pm #26929
    Lawrence
    Participant

    Hi this machine locks the door but won’t start the prewash light just flashes at me I assume this is a fault code.
    Any ideas what it indicates
    Lawrence

    April 26, 2007 at 11:35 pm #211951
    Penguin45
    Participant

    Re: Beko WMA1715S

    Every Beko I’ve come across with a flashing pre-wash light to date has been a board fault. There were some posts a while back about a reset procedure, but it’s never worked for me aas the board does not respond on any button.

    Chris.

    April 27, 2007 at 8:11 am #211952
    Lawrence
    Participant

    Re: Beko WMA1715S

    Cheers Chris , I will speak to SEME then .
    Lawrence

    April 27, 2007 at 5:49 pm #211953
    Washman
    Participant

    Re: Beko WMA1715S

    Hi

    Beko washing machine reset

    the fix for flashing pre wash led, or flashing start/cancelbutton is

    Turn power button off (not at wall)
    Select 90 degree wash
    Press Start and Cancel button down at same time for 3 seconds and turn power button on whilst still holding buttons down – Start light will flash.
    Leave power on.
    Select any Spin position.
    Press Start and Cancel button at same time again for 3 seconds – other buttons may start to flash – if they do, press Start and Cancel button together again for 3 seconds.
    Machine should be re-set ready for use.

    Mike

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.