- This topic has 5 replies, 2 voices, and was last updated 18 years, 11 months ago by
.
-
Posts
-
Anyone out there experienced with the Whirlpool commercial range, specifically the 3RAWZ tumble dryer. I think I need a Whirlpool engineer but maybe someone is familiar with it.
Problem is it’s totally dead. Checked power, thermal cut-off, hi-limit stat etc but no joy. Any common faults or hidden internal fuses or even phone number to technical department of Whirlpool will do; all I get is ‘sorry Sir, can’t help you there’.
Thanks.Re: Whirlpool Technical.
If it is an AWZ481 take the top off and go to the l/h side looking from the front, there is a fuse in the harness below the metal plate.
JohnRe: Whirlpool Technical.
3RAWZ481E to be precise. It sounds good to me as it does have a metal plate covering the loom on the l/h/s/. I’ll check that tomorrow but it shows no internal fuse on the wiring diagram so I didn’t look too closely. I know the older models did. Thanks John for getting back, hope you’re right. Can I abstract the urine and ask if you know what current rating it is as its miles away and nowhere to buy fuses locally.
Ta. Paul.Re: Whirlpool Technical.
happycack wrote:3RAWZ481E to be precise.
The full number wont go into SIOS, if you are looking for this model miss out the “3R” part.
Fuse is a 8A 20mm glass fuse.
JohnRe: Whirlpool Technical.
Got some of them, thanks again John, will let you know outcome when I’ve been back.
Paul.
- You must be logged in to reply to this topic.