AEG D4100 not heating

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › AEG D4100 not heating

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • May 6, 2007 at 12:02 am #27153
    ddherbs
    Participant

    Can anyone help?? 😯
    My double built in oven is not heating at all in the bottom (main) oven.
    I have checked the element resistances and they all appear correct (comparing them to the top oven). I pressumed that the stat was faulty and therefore ordered one………….doh! 😳 not the stat, made no difference.
    The fan is working and the light.

    I checked the voltage (I am conversant with electrics) across the element. and there is none! (The top oven element has mains accross the terminals). Can this still be a dodgy element?

    Any help would be appreciated and my get the wife off my back!!

    Thanks Darren

    May 6, 2007 at 5:46 am #212812
    Simon46
    Participant

    Re: AEG D4100 not heating

    Were resistances checked with wires off? Elements usually work or not. Power may not be getting to them from switchgear. Remove power completely before diagnosis. Please do not test live. Or Repairs@ for an engineer.

    Regards
    Simon

    May 6, 2007 at 2:43 pm #212813
    ddherbs
    Participant

    Re: AEG D4100 not heating

    Looking at other threads, I didnt check the Fan Element…in fact I didnt know it was there.
    Is it more likely to be this?

    If so is it fairly straight forward to remove?

    May 6, 2007 at 4:06 pm #212814
    Penguin45
    Participant

    Re: AEG D4100 not heating

    This is a multifunction oven – you should get heat in one postion at least. If you have no heat at all, there is a thermal safety cut-out which may have failed, or the function selector switch may be faulty.

    The element is this one, if you need it:
    http://www.ukwhitegoods.co.uk/modules.p … cts_id=138

    Penguin45.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.