Fagor 2VFT-400s touch control glass / ceramic hob

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Fagor 2VFT-400s touch control glass / ceramic hob

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • May 7, 2007 at 9:53 am #27166
    richaber
    Participant

    Hello folks, I have damaged a friends hob by chipping the edge of it. 😳 Is it possible to get the glass as a spare? I can get a new hob complete for £190 (unless anyone can do better). So, can the glass be bought separately for less than £190…? AND… is is a striaght swop or do you need some adhesive made from kryptonite to hold it in place, (it has no edge trim, the glass is bevel edged.

    May 7, 2007 at 10:10 am #212870
    kwatt
    Keymaster

    To be honest it’s probably going to be more cost effective to buy a new one, a replacement glass will rarely cost less than about £150 plus VAT and shipping. 🙁

    K.

    May 7, 2007 at 6:20 pm #212871
    Washman
    Participant

    Re: Fagor 2VFT-400s touch control glass / ceramic hob

    Hi


    Connect show the glass as £248.00 rrp
    As you say it is a touch control hobb , the same type of hobb is going to be very expensive.

    Mike

    May 8, 2007 at 9:18 pm #212872
    richaber
    Participant

    Re: Fagor 2VFT-400s touch control glass / ceramic hob

    Thanks guys, I have done the right thing and bought an identical replacement for £195, am fitting it tomorrow. :rolls: I must be more careful…

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.