- This topic has 2 replies, 3 voices, and was last updated 18 years, 11 months ago by
.
-
Posts
-
Hi,
I have a Samsung RS21DCNS
Model Code RS21DCNS1/XEU
S.No 854043CX901472PWhen running the condensor and compressor get very hot and the cooling fan does not seem to run. I have replaced the fan motor and checked all wiring etc to no avail. I cannot get any voltage readings after disconnecting the motor plug-I presume the controller will sense a fault and not supply power. Are there any other places to check for faults?
Will the fan start as soon as the compressor runs or does it need to get to a certain temperature before running?Any info would be appreciated.
Regards,
Andrew.Re: Samsung RS21DCNS Condensor cooling fan fault?
erm, your live testing mate, and we dont condone that
incidentally, as posted before, the fan doesnt have a supply with the door open, and thats why you wont get 240v there
simple really
shut the door, and wait a few minutes, the fan shoud run
but please, dont live test, especially not in a moisture intensive environment, it could get nasty
hope this helps
Re: Samsung RS21DCNS Condensor cooling fan fault?
Hi Andy
The condensor fan motor does not run when the compressor comes in unless the ambient temprature is so much so it is required.The compressor to run hot is normal,The fan would normally only run a couple of times a week if that in the current weather and temprature.
Helo’s comments refer to the evaperator fan assembly,either way live testing is not recomended even at 12v.
What was the actual fault youn was trying to resolve ?
Bryan
- You must be logged in to reply to this topic.