Diplomat ADP8332

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Diplomat ADP8332

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • May 9, 2007 at 10:15 am #27216
    Steven
    Participant

    Diplomat made by whirpool 854500215820.
    Fault F7 which is flow meter error.

    Is this the same part as diaphram switch?

    Thanks
    Steven

    May 9, 2007 at 3:19 pm #213101
    DentedPorsche
    Participant

    Re: Diplomat ADP8332

    Nope.
    Flow meter is embedded in the water matrix, left hand side at the bottom. Normal fault is bad connection.
    Water indicator is under the mesh filter, in the bowl area at 3 o’clock position.
    F7 can be one of several possibilities, check the known fault codes for full info.

    Brian

    May 9, 2007 at 3:33 pm #213102
    Steven
    Participant

    Re: Diplomat ADP8332

    Thank you Brian

    That wood explain why when it was pulled out it worked once then pushed back in place it failed again.
    Inlet valve & hose all ok.

    Cheers will check it out

    Steven

    May 10, 2007 at 7:09 pm #213103
    DentedPorsche
    Participant

    Re: Diplomat ADP8332

    If it works when it’s pulled out but fails when it’s pushed back into place I’d suspect the fill hose is being kinked, thereby cutting the water supply either partially or completely.

    Brian

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.