Ariston 1636S Washing Machine – Drum not filling with water

Home Forums Public Support Forums Help And Support Washing Machine Help Forum Ariston 1636S Washing Machine – Drum not filling with water

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #27640
    rachele
    Participant

    Hello,

    Just wondering if anyone can help. Having problems with the drum of the machine not filling with water. When you set it off it is fine for 20 seconds while the water enters the machine from the soap dispenser end. However, when it comes to the machine filling from the drum 2 lights on the front of the machine start flashing plus the light next to the on/off button.

    The lights are flashing by the easy iron and rapid buttons if this makes any difference?

    I have managed to get it working once or twice on the Rapid setting but now it has packed in totally. It used to get through the pre-wash then edhalf way through the wash (i.e when the drum needed re-filling).

    Once it has stopped the only way we can end the programme is to switch it off at the mains and then either start from the beginning or forward to the spin cycle.

    Does anyone know what the problem might be or have any advice?

    Thanks in advance,

    Rachele

    #214972
    hotpnt
    Participant

    Re: Ariston 1636S Washing Machine – Drum not filling with wa

    hi, from the top which lights are flashing ie, top, 2, 3 or bottom?

    #214973
    rachele
    Participant

    The bottom 2 lights are flashing

    #214974
    iadom
    Moderator

    Re: Ariston 1636S Washing Machine – Drum not filling with wa

    Neons 3+4 flasing indicate an NTC (temperature controller) fault. Could be the NTC itself, I have changed a few recently, or loose/broken wiring, faulty main PCB etc.

    Jim.

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.