Hitachi CV-810 Bagless Cylinder Vac Cleaner

Home › Forums › Public Support Forums › Help And Support › Vacuum Cleaner Help Forum › Hitachi CV-810 Bagless Cylinder Vac Cleaner

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • May 27, 2007 at 1:46 pm #27670
    Tiger2006
    Participant

    Hi

    Our Hitachi CV-810 (1400W, blue color) Vac Cleaner suddenly stopped during operation, today. I opened the motor compartment and found that its Fuse (250V, 10Amp) is blown away. The fuse has been secured in a small transparent sealed rubber pocket and it is soldired on both sides (with the black wire connected to the motor and on/off switch) i.e. it is not easy to change the fuse. I am wondering if changing the fuse would be enough to repair it or would it be blown away again if the main problem is in the motor. Any solutions/suggestions?

    May 27, 2007 at 2:22 pm #215137
    Penguin45
    Participant

    Re: Hitachi CV-810 Bagless Cylinder Vac Cleaner

    I’d check the motor very carefully. The brushes may have worn out, or the armature may be damaged or down to earth.

    Regards,
    Penguin45.

    May 28, 2007 at 5:38 pm #215138
    Tiger2006
    Participant

    Re: Hitachi CV-810 Bagless Cylinder Vac Cleaner

    Hi Penguin45

    I checked the motor and it’s body is live with the current i.e. the tester light turns-on on the motor body. I beleive, this means that the motor is gone. Am I correct?

    May 29, 2007 at 8:58 am #215139
    petalpop
    Participant

    Re: Hitachi CV-810 Bagless Cylinder Vac Cleaner

    motor + fuse would be needed
    not a cheep job 🙁

    June 3, 2007 at 9:12 pm #215140
    Tiger2006
    Participant

    Re: Hitachi CV-810 Bagless Cylinder Vac Cleaner

    Thanks for the response.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.