HELP REPLACE HOOVER SE220 DOOR SEAL

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › HELP REPLACE HOOVER SE220 DOOR SEAL

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • May 30, 2007 at 5:38 pm #27760
    maj314
    Participant

    :rolls: please please some one help. tried to read all forums, but still stuck, door seal was torn, so water escaping, bought new one from wuk whitegoods, but can’t take it off. got far as taking of white ruuber ring from outer door, but inner door seal is stuck, looks like it is screwed 😆 thanks in advance

    May 30, 2007 at 7:33 pm #215505
    helo_75
    Participant

    unplug the machine first of all

    undo the 3 screws at the back of the lid

    there is a clamp band using 7mm nts around the seal, you’ll see it if u look down the front

    thats as far as i can go, just take great care, theres a hell of a lot of very sharp edges and pieces of metal stuck out everywhere, id recommend some sort of protective glove

    hope this helps

    MAKE SURE ITS UNPLUGGED, please!

    May 30, 2007 at 10:50 pm #215506
    maj314
    Participant

    Re: HELP REPLACE HOOVER SE220 DOOR SEAL

    thanks will try that 2morrow, after work, have taken plugs off.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.