Hotpoint SDW60

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint SDW60

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • June 5, 2007 at 8:37 am #27880
    mike412
    Participant

    Hi Folks,

    Lights 1 + 4 Flashing = Software error.

    Has anyone any ideas on the usual causes please?.

    Thanks In anticipation,

    Mike

    June 5, 2007 at 10:09 am #215975
    iadom
    Moderator

    Re: Hotpoint SDW60

    Wake up Mike, 😀 moved from public forums to Trade forums. 😉

    Modules are dirt cheap on these, perhaps as well, they do seem to fail quite often.

    Jim.

    June 5, 2007 at 7:23 pm #215976
    mike412
    Participant

    Re: Hotpoint SDW60

    Thanks Jim,

    I did wonder where that post went, thought I had lost it in the ether.

    I posted this via a link from the public forum, just proves I was searching for previous posts on the subject !.

    I did look up on Connect site , module CC000110348 is £38.78 +vat.
    This d/w is well under 5yrs old and customer is aware of warranty for parts so I advised customer to take U/G route.

    Thanks for your help once again.

    Regards,
    Mike

    June 5, 2007 at 7:41 pm #215977
    iadom
    Moderator

    Re: Hotpoint SDW60

    According to Partfinder the module for an SDW60 is a C00143108 at just under £11.00 ex vat. 😕
    The part number you have given has to many C’s and 0’s. 🙂

    the number you have given, minus the extra C’s & 0’s has been supreceded by two alternatives dependant on date code, both under £21.00 ex vat.

    Looks like you may have missed a nice little earner there.

    Jim.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.