CDA CW 494

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › CDA CW 494

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • June 5, 2007 at 8:38 pm #27901
    RodShaw
    Participant

    Don’t know much about this stuff but here is the problem.

    I turn it on (tried various programmes) and it drains (if needed) then starts to fill but after if fill a bit, it stops. After 4/5 seconds, the ‘Start’ button starts flashing. I’ve tried looking about underneath but the floor is dry. It is an intigrated unit and would be pretty dificult to move.

    Thanks in advance for you help 🙂

    June 5, 2007 at 8:48 pm #216024
    Penguin45
    Participant

    Re: CDA CW 494

    Count the pattern of the flashes (ie 1-2-3-4-pause=repeat) and report back.

    Penguin45.

    June 6, 2007 at 6:25 am #216025
    RodShaw
    Participant

    Re: CDA CW 494

    draining takes 30 secs, filling takes about 1min 30 (prob useless info) the flashing is 1-2-3-4-5-6-pause, repeat.

    June 6, 2007 at 8:05 am #216026
    clivejameson
    Participant

    Re: CDA CW 494

    6 flashes is ‘flow meter failure’….not usually failed, most likely a poor connection to it but it could need the metering tank replacing or the pcb itself could be faulty.
    If you need an engineer then click the link below to see if there’s someone near you.
    If you’re having a go yourself then don’t forget to unplug before you do anything :zap:

    June 6, 2007 at 8:18 pm #216027
    RodShaw
    Participant

    Re: CDA CW 494

    is there anything I can do? or do i have to pay the man?

    June 7, 2007 at 12:11 am #216028
    clivejameson
    Participant

    Re: CDA CW 494

    It involves a small amount of dismantling and re-assembly with the associated electrical hazards too…if you are not up to it then best call in a professional 😉

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.