- This topic has 1 reply, 2 voices, and was last updated 18 years, 10 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Can anyone please help? the dishwasher starts ok from cold. Once the water gets hot it stops with all power cutting out. Once cool the power comes back on after flicking the socket power switch a couple of times. Is there a temp sensor on the model taht could cause this to happen?
thanks
AliceRe: Whirlpool ADG957 (built in)
Almost certainly the heating element breaking down and going to earth under load.
You’ll need one of these:
http://shop.ukwhitegoods.co.uk/product_ … cts_id=895Ideally, you should test the heater with a Megger to be certain.
Power off, of course.
Regards,
Penguin45.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.