- This topic has 6 replies, 3 voices, and was last updated 18 years, 10 months ago by
.
-
Posts
-
Just got this m/c in customer complained m/c dead when switched on. Sure enough when I switch it on nothing! However when I blow into the pressure stat – pump runs and door interlock locks, but nothing else.
Any useful pointers would be appreciated?
Brian.Re: Hoover auto HC6 130M
Checked connections all ok. I do have a couple of second hand modules that look the same as the original (dont know how interchangeable these modules are though, difficult to assess as they all look alike with little in the way of identification) 😯
Nevertheless tried them on the machine, 😕 didn’t blow fuses (always a good sign!) but same fault occurs… m/c dead until I activate the pressure stat.
Then pump runs & door interlock locks but nothing else happens (cant believe all three modules have the same fault! – so assuming there interchangeable? – this more or less discounts the module!) Unless someone knows different of course 😳This machine is driving me crazy 😈 Please help!!!
Brian.Re: Hoover auto HC6 130M
have you tried replacing the small slave timer.
these pcbs are all supposed to be different but they can be interchanged.Re: Hoover auto HC6 130M
Thanks suedehead you might have a point about the slave timer!
I’ll contact Tony at emw tomorrow, they do slave timers – can also ask him his advice.Brian.
- You must be logged in to reply to this topic.