Zanussi Dishwasher

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi Dishwasher

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • June 12, 2007 at 6:40 pm #28081
    johno1998
    Participant

    Zanussi DE6544 It does everything ok to start with, but after about 3 mins into the wash it stops and starts to flash on drying phase and end of program. They are the 2nd and 3rd lights and they just flash constantly i have replaced main pcb but still same fault , could it be something to do with the heater.

    June 12, 2007 at 7:06 pm #216785
    Penguin45
    Participant

    Re: Zanussi Dishwasher

    I think it’s flood protection activated. It’s probably got a claged up IWMS if that is the case.

    Chris.

    June 12, 2007 at 7:16 pm #216786
    johno1998
    Participant

    Re: Zanussi Dishwasher

    what is IWMS 😳 The dishwasher does not pump when it stops operating it just stops and the lights flash.

    June 12, 2007 at 8:06 pm #216787
    Penguin45
    Participant

    Re: Zanussi Dishwasher

    There’s a file in your inbox……….

    Flood protection pnuematically shuts off the inlet valve. IWMS is the big matrix on the left hand side of the machine.

    Chris.

    June 12, 2007 at 8:24 pm #216788
    johno1998
    Participant

    Re: Zanussi Dishwasher

    thanks for that penguin according to the led 10 and led 11 the fault is pointing to the motor but the motor works fine ❓

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.