Bosch d/w

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch d/w

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 15, 2007 at 3:27 pm #28163
    Steven
    Participant

    Hi all

    Bosch d/w sgs43a52gb35

    Blew fuse found a short, tested out found one of the blue capacitors next to a relay on the pcb dead short no obvious damage to board, any one else had a problem with this fault.

    Steven

    June 15, 2007 at 5:56 pm #217158
    nationalhomecare
    Participant

    Re: Bosch d/w

    Hi
    Not seen it before, Interesting one as they normally muller the board if a component fails 😕
    Usuall suspect is the mains suppressor as they bleed to earth really bad and can cause nuisance tripping and/or explode, I can’t understand why a suppresor is needed in a dishwasher?
    Steve 😀

    June 18, 2007 at 8:59 am #217159
    Steven
    Participant

    Re: Bosch d/w

    My first port of call was to the mains filter, then heater etc, when they tested out ok, started to disconnect everything one by one until I found that the board was the only thing still connected. 😕

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.