Hoover Vision Mod HJ16

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hoover Vision Mod HJ16

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 18, 2007 at 1:08 pm #28227
    silverbroom
    Participant

    Hi,
    Never been to one of these, Hoover Vision Model HJ16 Ser 31138167.

    Lady says the on/off button seems to have sunk back from facia panel and won’t switch on. Is this part of the PCB? any info much appreciated.

    thanks silverbroom

    June 19, 2007 at 4:54 pm #217422
    silverbroom
    Participant

    Re: Hoover Vision Mod HJ16

    Went out today to this machine, the kind with the pot belly.

    As customer reported on/off has sunk back through panel and wont switch on.

    Took top off and can see PCB that this button would activate, as the board retails about £150 and keeping in mind this has a five year parts warranty did not venture further in case of invalidating said warranty.

    Any info would be a help before I suggest to customer she contact Hoover.

    silverbroom

    June 19, 2007 at 5:42 pm #217423
    timdowning
    Participant

    Re: Hoover Vision Mod HJ16

    If this is the same set-up as the normal fronted machines the pcb can be clipped back in place and a screw can be inserted to secure pcb assy.
    Had this a number of times on the newer machines.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.