- This topic has 4 replies, 3 voices, and was last updated 18 years, 9 months ago by
.
-
Posts
-
Hi,
Dishwasher seems to have gave up tonight. Thought I would try on here for advice before I get help. The machine seems to be trying to fill but no water is going into the machine. It then bleeps continually ? I have no manual to look for any troubleshoots as this machine was in the house when I moved in . I tried this a few times and you think it is about to work and then the bleeps start. Any help much appreciated, KD 😕Re: Diplomat ADP 8322 .Help required please
The start button light will be flashing a code to you.
Count the number of flashes between pauses and post the result here.
Someone will then be able to help you further.DP
Re: Diplomat ADP 8322 .Help required please
Counted 4 flashes between each pause. Thanks again in advance. KD
Re: Diplomat ADP 8322 .Help required please
F4 – no drain detected in the time allowed. If there is water in the machine, you have a blockage. If there is no blockage, look under the filters in the sump for a black grid, this is water level switch and it will probably be full of muck and goo, holding it in the closed position. A toothbrush and plenty of hot water will clear it usually. If it doesn’t it’s a twist fit from underneath for better access.
Power off first………..
Penguin45.
- You must be logged in to reply to this topic.