Zanussi DE6965 dishawasher no heat

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi DE6965 dishawasher no heat

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • June 20, 2007 at 4:59 pm #28318
    DPDOM
    Participant

    Hi Chaps
    Been to this today which complete the cycle with no heat.
    Heater is OK
    Module is different to what I’ve seen before as it is not on the left of the console but a seperate power module on the right of the console.
    There are no dry joints on the relay.
    I thought that it was the blue stat that screws into the base under the heater thinking it was a thermal fuse but when I came to order it it was discribed as a sensor and now I’m not sure if it is a thermistor.
    Any Ideas would be great.
    Regards
    Dave

    June 20, 2007 at 5:56 pm #217862
    Penguin45
    Participant

    Re: Zanussi DE6965 dishawasher no heat

    It’s got a double safety on it – 1521172-10/4, otherwise IWMS problems?

    Chris.

    June 20, 2007 at 6:41 pm #217863
    DPDOM
    Participant

    Re: Zanussi DE6965 dishawasher no heat

    double cut out is ok.
    does that mean the blue stat is the thermistor?
    I saw one that looked exactly the same on a beko (merloni) the other day which was a toc.

    June 24, 2007 at 4:20 pm #217864
    Bernie
    Participant

    Re: Zanussi DE6965 dishawasher no heat

    If this is the same as the DX6453 then see my post Saturday 23 June
    Zanussi Dishwasher DX6453 No Heat

    Bernie

    June 24, 2007 at 6:44 pm #217865
    Dales-Electronic
    Moderator

    Re: Zanussi DE6965 dishawasher no heat

    There are two versions of this model a conventional model and a fully electronic – need the pnc to be sure. Assuming you have the latter the temperature sensing is done by a ntc thermistor (should operate in the range 6kohm to 600ohm)

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.