Servis M9310W

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Servis M9310W

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • July 4, 2007 at 9:03 pm #28736
    dena89
    Participant

    Help,
    machine tripped cust electric, found main module to be burnt at top plug, also print and a triac short. all lights on front on. fitted brand new board, rewired plug with amp tags. All lights still on and machine dead. Any thoughts?

    July 4, 2007 at 9:37 pm #219844
    deltra
    Participant

    Re: Servis M9310W

    possibly blown front board as well ❓

    July 4, 2007 at 10:03 pm #219845
    dena89
    Participant

    Re: Servis M9310W

    Figured maybe that……..the one with the start button on? must admit didnt check to well as was late for a date. gone 6pm and customer was a………
    thanks will have to go back.
    but thanks.

    July 4, 2007 at 10:08 pm #219846
    dena89
    Participant

    Re: Servis M9310W

    Actually is worried now about what tripped electric……..can burnt board do that or maybe heater……did check motor and door lock..
    As I said have to go back……

    July 4, 2007 at 10:57 pm #219847
    deltra
    Participant

    Re: Servis M9310W

    all depends which part of module is burnt ❓ F8+F2 door lock,heaterF5,F9 etc.motor is block connector on side.follow wires from burnt connections,and see what they are connected to 😉

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.