Hygena APL 8224/3

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Hygena APL 8224/3

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 5, 2007 at 6:47 pm #28763
    Conna
    Participant

    Hi Guys,

    I’m hoping someone can help me with my dish washer problem. All of a sudden I have no water coming in, just prior to this happening the washes were not very good to suggest something was starting to happen so I don’t think it broke from one wash to the next. Upon turning the dial I can hear things trying to work. I’m just guessing it is the water inlet valve but is there anything else I need to check before I go out and buy one just in case I waste my money and find out it was something else. Also, if it is the inlet valve, can they be taken apart and serviced? I have never messed with a dish washer before so if there is anything I need to know regarding finding the valve and removing it please let me know.

    There are also other markings other than the model No which are Type 8.p2.2144211 if this helps at all.

    Kind regards,

    Conna.

    July 6, 2007 at 9:20 pm #219939
    eastlmark
    Moderator

    Re: Hygena APL 8224/3

    There is a measuring container in the left hand side panel (as you look at the front) which could be blocked. Or sometimes we get wires breaking in the door loom which need expert repair. It could be the valve but its unlikely. Power off before touching anything please.

    July 6, 2007 at 9:25 pm #219940
    Conna
    Participant

    Re: Hygena APL 8224/3

    Ok, I’ll check that out tomorrow thanks.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.