- This topic has 1 reply, 2 voices, and was last updated 18 years, 9 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Belt just gone on my tumble dryer, have taken out as many screws as i dare but cant seem to get into the blasted thing! Is there an easy way i haven’t spotted?
Re: hotpoint 9306p ‘reversomatic dryer de luxe’
Put them all back in and start again, turn upside down, remove kickplate plate along the front and carefully prise the front panel forward. It is just possible to change the belt from there. Number of screws to remove about 7. Make sure the internal vent goes back in place. All with the mains plug out of course. :zap:
If you cannot manage that then try the link below for an engineer.
Jim.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.