Zanussi DX6453 heating problem

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Zanussi DX6453 heating problem

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 14, 2007 at 3:34 pm #28995
    stantheboxer
    Participant

    I have an Zanussi dishwasher thet has just started to not heat the water during the wash cycle and when drying nothing happens. The lights work OK on the front panel and the cycle time is correct. Any idea as machine just out of warranty-I noticed a topic regards a dry joint on the PCB-would that cause the same problems and how do I fix it? ❓

    July 14, 2007 at 4:11 pm #221030
    Penguin45
    Participant

    Re: Zanussi DX6453 heating problem

    Definitive thread on the subject is here:
    http://www.ukwhitegoods.co.uk/modules.p … =aeg+joint

    Penguin45.

    July 17, 2007 at 4:50 pm #221031
    dna
    Participant

    Re: Zanussi DX6453 heating problem

    Two things it can be dry joint on pcb heater relay or heater itself. Can sometimes resolder the joint but in most cases the pcb has to be changed. Between £50 -90. power off if investigating

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.