- This topic has 4 replies, 4 voices, and was last updated 18 years, 8 months ago by
.
-
Posts
-
Called out for not heating. Heater operates initially then nothing. Heater and safety stat ok so I guess the problem is either the sensors or the module (£139.83 + delivery from Bosch 8O). There seem to be two sensors one on the front and one thats part of the heater assy. I hardly ever see any dryers these days, is this a common problem on this model ❓ Any advice greatly appreciated.
Re: Bosch Sensor Dryer WTL6103GB/01
Hi
Check for worn sensors (carbon) and/or poor connection from module to sensor,blocked/clogged condenser cartridge and blocked obstructed vents. Not exhaustive just some poinetrs 😀
Oh and check your email 😉Greg
Re: Bosch Sensor Dryer WTL6103GB/01
Hi,
I posted the same thing last year and never had a reply. In the end customer had a White Knight vented and loves it. Still have the dryer ine garage so any info would be welcome.
Thanks
RobRe: Bosch Sensor Dryer WTL6103GB/01
Hi my name is colin
just been called out to a family/friends dryer with no heat also .
removed the back and hoped the stat would have just tripped but in this case of course not.
tested the thermistor stat above element and get a reading element reads ok also found exhaust thermistor in front of dryer but not sure what these thermistors should read.
any more idears ?
regards
colin
- You must be logged in to reply to this topic.