Hotpoint WT960G

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WT960G

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 17, 2007 at 4:01 pm #29074
    spanner51
    Participant

    I went to this machine today, and when it is pluged in ;-
    there is no display
    after 5 secs the door lock comes on
    after 10 secs the door lock goes off

    As there is no display I couldn’t do any thing with it. I removed the console p.c.b, but nothing was obvious.

    I have therefore deduced that the console p.c.b must be the fault. Is there any thing else it could be? or is there anything which would cause the p.c.b to blow?

    Any suggestions I would be grateful.

    July 20, 2007 at 4:47 pm #221403
    Tony_EMW
    Participant

    Re: Hotpoint WT960G

    Interlock short or motor fault are very common causes of dead board. Send it to us for test/repair. 01159652118

    July 22, 2007 at 12:36 am #221404
    bubs
    Participant

    Re: Hotpoint WT960G

    More like the power pcb has gone, had one a few days ago.
    Graeme

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.