Bosch WFX3267GB /10 – Filter??

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Bosch WFX3267GB /10 – Filter??

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 23, 2007 at 9:33 am #29190
    Markr
    Participant

    Does anyone know if there is a better filter to fit the outlet pump on the above machine.
    As i am now about to purchase the second replacement pump unit (BS51120 – Bosch & Siemens Washing Machine & Washer Dryer Pump) as a coin has broken the fan off.
    I know other makes and models have some sort of mesh filter, to prevent bits getting to the fan blades.
    Please help as this is getting expensive and time consumming, having to replace the pump.

    Thanks
    Markr

    July 23, 2007 at 9:55 am #222254
    iadom
    Moderator

    Re: Bosch WFX3267GB /10 – Filter??

    Even in machines with coin traps it is not uncommon for other items to get past and into the pump causing damage. It really is worth taking the few extra seconds to check all pockets etc. Prevention is better than cure.

    The filter type you mention is very prone to blockages from lint needing constant messy cleaning out as well.

    Damage to the pump impellor is very minor indeed when compared to the damage that coins etc can do to the inner & outer drum, and no filter will stop that.

    There is no alternative pump filter for your machine BTW.

    Jim.

    July 23, 2007 at 3:31 pm #222255
    Markr
    Participant

    Re: Bosch WFX3267GB /10 – Filter??

    Thanks for the reply.
    I’ll just have to keep sending the family subliminal messages to check all pockets before washing.

    Thanks
    Markr

    July 23, 2007 at 4:18 pm #222256
    iadom
    Moderator

    Re: Bosch WFX3267GB /10 – Filter??

    Giving them the bill for the repair might help to concentrate minds. I have to say though that the final responsibility lies with the person who loads the machine.

    Jim.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.