Bosch SGS43A32GB dishwasher fills at the end of cycle

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch SGS43A32GB dishwasher fills at the end of cycle

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 25, 2007 at 8:43 am #29254
    whiskeyjack6058
    Participant

    I seem to be hounded with Bosch dishwashers at the moment. I have the above one in my workshop at this current moment. I went out to it ten weeks back as the customer had reported to me that the machine fills up after it has completed its program and floods. On my first visit to the house I removed the plastic cap in the sump and removed and cleaned the float which was very badly gunged up. Suggested the customer tried it. He called back and told me that it was still the same and he had managed to get hold of a new PCB to try on it. Customer fitted that and it’s still the same. (Glad I didn’t order it.) So now it’s with me for testing. I tested it, and it does as he says, right at the end, it begins to fill to the level where the plastic float is activated and the flood protection kicks in.

    Help 🙁
    Any ideas?
    Thanks, Regards…
    Rob.

    July 25, 2007 at 6:56 pm #222493
    Redflame
    Participant

    Re: Bosch SGS43A32GB dishwasher fills at the end of cycle

    Is this the Grey Plastic Base type – If so read some other posts this is very common.

    http://www.ukwhitegoods.co.uk/modules.p … ic&t=26031

    July 25, 2007 at 7:43 pm #222494
    whiskeyjack6058
    Participant

    Re: Bosch SGS43A32GB dishwasher fills at the end of cycle

    Yes it is the plastic tub version and you have just confirmed my suspitions redflame. I have cleaned this thing allready but to no avail. However I have not as yet changed it. New float on order.
    Thanks.
    Regards,
    Rob.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.