Diplomat ADP8332 ( Whirlpool Clone)

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Diplomat ADP8332 ( Whirlpool Clone)

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • July 27, 2007 at 3:33 pm #29323
    goosegreen
    Participant

    After replacing the Askoll spray pump on the above today I noticed that the top spray arm is not rotating. I found that there are no seals in the plastic molding that the top spray arm tube pushes into, Would any one have the know if the seals are available separately or is it a complete tube assy?.


    Cheers Goose

    July 27, 2007 at 3:46 pm #222745
    johnmac11
    Participant

    Re: Diplomat ADP8332 ( Whirlpool Clone)

    There are no seals, it is probably the moulding at the bottom of the spray arm that is broken causing the tube to dislodge under pressure.

    http://shop.ukwhitegoods.co.uk/product_ … cts_id=882

    John

    July 27, 2007 at 6:45 pm #222746
    goosegreen
    Participant

    Re: Diplomat ADP8332 ( Whirlpool Clone)

    Jonmac, I should have checked the bottom molding as I have had to fit a few in the past, but something is wrong with the upper spray arm supply tube, The holes are bigger than the tube mounted underneath the basket which fit in to it. here is a pic off my mobile:
    . It looks like the holes have 4 sticky pads and Iam sure there should be rubber grommits attached.

    Goose

    July 28, 2007 at 9:08 am #222747
    goosegreen
    Participant

    Re: Diplomat ADP8332 ( Whirlpool Clone)

    Looks like connect 5045170611606 is the part I am after looks likes it comes with grommits.


    Goose

    July 28, 2007 at 9:36 am #222748
    johnmac11
    Participant

    Re: Diplomat ADP8332 ( Whirlpool Clone)

    Sorry Goose,

    I missed your post last night.

    Looking at sios there are only two parts there, the first is 481253029331 which is the complete tube ass and the second is 481236068687 which is the spray arm ass, retail for both is £36.09 ex vat.

    John

    July 28, 2007 at 11:32 am #222749
    laurenceuk
    Participant

    Re: Diplomat ADP8332 ( Whirlpool Clone)

    I was just about to post a query about the askol spray pump when I noticed
    this posting.

    The Diplomat model number is ADP8322 (W/Pl 854500015810).

    I did a general search under the model number in Connect and this motor
    came up 5031680945362. Is this the correct one – it is different than the
    askol and I am hoping that this is a replacement.

    If not could you give me the part number I need.

    Sorry to but in on your thread, goose.

    Thanks

    Laurence

    July 28, 2007 at 11:52 am #222750
    johnmac11
    Participant

    Re: Diplomat ADP8332 ( Whirlpool Clone)

    Hi Laurence,

    Read this post and all will be answered.

    http://www.ukwhitegoods.co.uk/modules.p … ge&pid=159

    John

    July 28, 2007 at 12:28 pm #222751
    laurenceuk
    Participant

    Re: Diplomat ADP8332 ( Whirlpool Clone)

    Perfect John, thanks.

    Fault number 4 is my problem.

    Laurence

    July 28, 2007 at 2:25 pm #222752
    johnmac11
    Participant

    Re: Diplomat ADP8332 ( Whirlpool Clone)

    If no 4 is your problem keep the old pump housing, most common fault is a leak in the hose (fault 1) and the hose is not available as a spare part.


    John

    July 28, 2007 at 4:22 pm #222753
    laurenceuk
    Participant

    Re: Diplomat ADP8332 ( Whirlpool Clone)

    Thanks John,

    Keep it as a spare – yes.

    OK

    Laurence

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.