indesit widl 102

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › indesit widl 102

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 28, 2007 at 11:21 am #29336
    Galway
    Participant

    hi looked at this w/d today .the 1st and 4th lights are flashing and the door lock light also flashing.i know that from the widl codes this is an eprom/setup problem but what does this all mean?is it repairable? 😕
    thanks

    July 28, 2007 at 10:33 pm #222804
    Penguin45
    Participant

    Re: indesit widl 102

    You might get away with replacing the pre-programmed EEPROM – best solution is a programmed replacement board from EMW.

    Chris.

    July 29, 2007 at 2:14 pm #222805
    Galway
    Participant

    Re: indesit widl 102

    thanks chris

    August 11, 2007 at 12:07 pm #222806
    Galway
    Participant

    Re: indesit widl 102

    hi
    replaced board on this m/c.but now the 3rd light is flashing,this i think is a motor/jammed tacho or communication fault. it tries do do what it is supposed to but the stops then tries again and so on . should i try a new board again or what ? 😕
    thanks

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.