- This topic has 10 replies, 5 voices, and was last updated 18 years, 8 months ago by
.
-
Posts
-
Can someone please find the part number for the fill valve to dispenser hose for this Servis built machine. It’s a four way grey conveluted hose that goes to all the valves and diverts to the dispenser and the condenser.
Many thanks
Bob
Re: Diplomat APM8703-2 Internal dispenser hoses
Hi
720429300 double electro valve pipe connection
398211400 transfer feed pipe
398213800 pipe couplingMike
Re: Diplomat APM8703-2 Internal dispenser hoses
Thanks Mike. There’s so much water I can’t see which bit is leaking.
When I turned the machine on I got hit straight in the face 😯
Thanks again
Bob
IIRC there’s a kit for these things as they split a fair bit for some reason. If you remind me in the morning Bob I’ll look into it when I’m in the office with the info to hand.
K.
Re: Diplomat APM8703-2 Internal dispenser hoses
Apparently there are ten of these machines in the same block and three have flooded. They are all only a few months old.
If there is a kit I think I might need it!
Bob
Re: Diplomat APM8703-2 Internal dispenser hoses
It will be the valve to dispenser hose which has split at the ‘Y’ intersection
Part number 398115400 for the same one, although they apparently have a new style (stronger hose with plastic coupling at the joint) which I don’t have a listing for. There’s a small rubber reducer that comes with the 398115400 kit which you need to fit into the hose or else it will just burst again (diagramatic instructions are included in the pack).
I remembered to ask Craig if it was the one I was thinking on, seems it was. 😉
If you’re stuck Bob we have some.
K.
- You must be logged in to reply to this topic.