hotpointdf41

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hotpointdf41

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 1, 2007 at 10:17 am #29441
    kevinlewis
    Participant

    before i get chance to select a programme it faults with constant beeping and showing what looks like e20 (the display is also a bit dodgy!)
    had a look at the known fault codes this apparently doesnt exsist?
    any ideas much appreciated!

    August 1, 2007 at 11:59 am #223101
    Martin
    Participant

    Re: hotpointdf41

    kevinlewis wrote:had a look at the known fault codes this apparently doesnt exsist?

    It does exist and is on Page 1 Kevin 😉

    E20 = Temperature fault….(duff heater maybe?)

    August 2, 2007 at 8:32 am #223102
    kevinlewis
    Participant

    Re: hotpointdf41

    yeah your right sorry!
    however all the machine is constantly doing is running the drain pump. as if it was in flood mode. its not though as theres no base on the machine never mind a float.
    unless they have been removed in the past?but noone has been to this machine in 5 years apparently

    August 2, 2007 at 8:58 am #223103
    Martin
    Participant

    Re: hotpointdf41

    kevinlewis wrote:however all the machine is constantly doing is running the drain pump.

    Wiring harness shorting out at the bottom of the door maybe?

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.