belling ceramic hob xou 388

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › belling ceramic hob xou 388

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • August 10, 2007 at 1:52 pm #29658
    richardable
    Participant

    need to change the 4 regulators for this hob. have ordered and got 4 regulators part no. 082617138, with terminals P1. 2, P2, S1. S2, PILOT , 4.
    on the existing regulators i’ve got…1, 1a, 2(spare), 2B(spare), 3, 3B, 4(spare), 4B, 5(spare), 5B, 6. 6B, 7, 7B, 8(spare), 8B(spare)
    1…..yellow 3…..resistor link to 3B
    1B….red 3B…white 4B……maroon
    6……internal link to 4B 6B …pink 7…….black and black link to 5B and resistor link to 7B.
    new regulators supplied without conversion wiring diagram.
    has anyone got one or know how to ensure new regs are wired correctly.
    richard

    August 10, 2007 at 7:30 pm #224024
    maltheviking
    Participant

    Re: belling ceramic hob xou 388

    Richard what type are the old ones, and I presume the new ones are EGO?
    M

    August 10, 2007 at 7:42 pm #224025
    smartin
    Participant

    Re: belling ceramic hob xou 388

    richard i think you have diamond h,s see dave conways sticky at top smartin

    August 10, 2007 at 8:15 pm #224026
    aqualectric
    Participant

    Re: belling ceramic hob xou 388

    Try http://www.diamond-h-controls.co.uk
    All of the wiring diagrams and conversions are there. Also internal wiring is illustrated.

    HTH,

    Steve.

    August 15, 2007 at 10:05 pm #224027
    richardable
    Participant

    Re: belling ceramic hob xou 388

    m, yes new ones are ECO. i’ve looked on the link shown above for diamond but can’t find conversion info. will e-mail them tomorrow.
    richard

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.