- This topic has 4 replies, 3 voices, and was last updated 18 years, 8 months ago by
.
-
Posts
-
sure this one has been answered many times,machine wont advance past P0,and so cycle wont start,normally the programmes are 1 to 6,possibly not related but i’ll tell you anyway if you press the clock button,22 shows and you get one beep.
This may help,before this problem occured the door was getting harder to open after a cycle,to the point when it actually jammed shut,I managed to get it open since then i’ve had this problem.
many thanks,please help Mrs is doing me head in.Hi Moggy,
Someone will help you, I don’t know the machine, but can you please keep it to one thread for one problem as it only confuses people and all too often leads to no more of a response?
Thanks.
K.
Re: DIPLOMAT ADP 8252 PROBLEM,WONT ADVANCE TO PROGRAMME SELE
If the door catch is in the closed position, you cannot programme the machine.
Penguin45.
Re: DIPLOMAT ADP 8252 PROBLEM,WONT ADVANCE TO PROGRAMME SELE
thanks for that,i’m at work at the mo so cant see the DW,is it a case of adjusting the door catch,then trying the reset.the mrs has tried switching it off for 30minns this am then pressing P,four ( 4) times,as per other answers,but it didnt work.
Re: DIPLOMAT ADP 8252 PROBLEM,WONT ADVANCE TO PROGRAMME SELE
It’s a SMEG machine – there have been issues with the control panel failing and allowing the latch mechanism to move about. The latch itself may be faulty.
spares@ukwhitegoods.co.uk will be able to supply any spares required.
Power off before removing the panel.
Regards,
Penguin45.
- You must be logged in to reply to this topic.