Russia calling!

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Russia calling!

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • August 20, 2007 at 4:03 pm #29925
    Martin
    Participant

    I got this email today: –

    alzspb wrote:Hello Martin!

    Can You help me with Ariston AML 105 EX error codes?

    Now flashing lower two lights in buttons and locker light. Machine
    filling water and pumped out this and dryer fan working.

    С уважением, Алексей.

    mailto: alzspb@yandex.ru

    Can anyone help my Russian comrade on this? 🙂

    August 20, 2007 at 4:26 pm #225211
    iadom
    Moderator

    Re: Russia calling!

    Perhaps Baron may have an idea, he is a lot closer and that model number may mean something to him. We could hazard a guess but would need to know if the machine has four or five vertical neons. both the UK Ariston varients that start with AM are WMA based machines, surely they are not shipping them from the UK to Russia. 😯

    Jim.

    August 20, 2007 at 7:30 pm #225212
    Penguin45
    Participant

    Re: Russia calling!

    http://telur.ru/good_page.php?id=36873&from=ya

    Looks like a late Ariston A1 series to me…… so it should be a WIDL machine, yes?

    Chris.

    August 20, 2007 at 10:10 pm #225213
    alzspb
    Participant

    Re: Russia calling!

    Hi!

    I`m that guy from Russia, which asked Martin abouе ARISTON AML 105 EX.

    Now i have a error codes for Merloni wahing machines.

    In my machines it must be F03.

    I checked resistance of main thermo sensor – it`s about 23-25kOm in 16C temperature. BUT on main board contacts 11 and 12 ( J8 ) resistance is about 10k0m. I look on this and see what pin 12 of J8 connect directly on EVO2 chip. Also i have burned J10 between pins 2/3 and pins 4/5. This connector ALSO directly connect to chip.

    May be on burning J10 time chip was damaged?

    This is picture of my dead bastard 🙂

    August 20, 2007 at 10:56 pm #225214
    helo_75
    Participant

    u got REAL problems there m8

    u really need a new pcb, probably an eprom, and id be changing that loom too, not safe at all

    personally, id scrap it

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.