Bosch SGS43A18GB/17 poor drying

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch SGS43A18GB/17 poor drying

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • August 30, 2007 at 10:06 pm #30179
    Simon46
    Participant

    Has any body any ideas regarding this. Rinse aid used heat noted as per cust. Cold fill. 😕

    Regards
    S.

    August 30, 2007 at 10:15 pm #226172
    nomadPaul
    Participant

    Is it heating on all cycles ? A problem that sometimes occurs is low water levels on 2nd fill for rinse cycle due to blocked ‘ribbed’ hose . This stops the water from heating and therefore no drying properties.

    August 30, 2007 at 10:22 pm #226173
    senseib
    Participant

    Re: Bosch SGS43A18GB/17 poor drying

    Simon46 wrote:Has any body any ideas regarding this. Rinse aid used heat noted as per cust. Cold fill. 😕

    Regards
    S.

    I Put this through the enigma machine – came up with nothing.

    Uncrackable 😆

    August 30, 2007 at 10:33 pm #226174
    gegsy
    Participant

    Re: Bosch SGS43A18GB/17 poor drying

    You could try this Simon…….

    Hold down the S2 button and switch on the appliance. “0” is indicated on the digital display. If the Normal button is pressed again, “1” is displayed and intensive drying is switched on. If the appliance is switched off, the value is saved. If intensive drying is activated, the temperature is increased by 3 K in the final rinse.

    S2 is the third button along, counting one below 7 seg as the 1st button.

    Greg 😉

    August 31, 2007 at 7:39 am #226175
    Simon46
    Participant

    Re: Bosch SGS43A18GB/17 poor drying

    Ta all. Will try S2 button.

    Regards
    S.

    September 3, 2007 at 8:55 pm #226176
    ChrisR
    Participant

    Re: Bosch SGS43A18GB/17 poor drying

    I have a poor drying problem on my dishwasher.

    Its a Bosch SGV 43A03GB/17.

    Gegsy,are there any pcb codes to upgrade the heating.

    Ta. Chris.

    September 3, 2007 at 9:13 pm #226177
    gegsy
    Participant

    Re: Bosch SGS43A18GB/17 poor drying

    Only as above AFAIK

    Greg

    September 3, 2007 at 9:15 pm #226178
    superfix
    Participant

    Re: Bosch SGS43A18GB/17 poor drying

    If ther is an intensive dry setting, it’s in the manual :rtm:

    September 3, 2007 at 9:22 pm #226179
    gegsy
    Participant

    Re: Bosch SGS43A18GB/17 poor drying

    Thats the procedure I explained Simon, in the above reply 😉
    Yes it is in the manual, but they never read it :rolls:

    Greg

    September 3, 2007 at 9:45 pm #226180
    ChrisR
    Participant

    Re: Bosch SGS43A18GB/17 poor drying

    😳 You`re right there Gegsey,I never have read the manual!.

    September 3, 2007 at 9:52 pm #226181
    gegsy
    Participant

    Re: Bosch SGS43A18GB/17 poor drying

    ChrisR wrote:😳 You`re right there Gegsey,I never have read the manual!.

    :rotfl:

  • Author
    Posts
Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.