- This topic has 6 replies, 3 voices, and was last updated 18 years, 7 months ago by
.
-
Posts
-
went to this machine, top R.H.S. front spring support bolted to drum has broken, can repair this…but I am concerned as any the program selected aborts soon after start….As the drum is sitting at an angle, can this be the reasons or perhaps a more serious problem.
Also the customer run a wash with extra water, and the clothers although not a heavy load, but were bunched on spin.
any advice would be helpfull
Cheers John.Re: Miele W844 Nr00/48061841
hi
ive seen mieles go here a few time (spring support) not really repairable unless you can weld a small rod across the top lip where the spring goes.
Dont think the drum at an angle will cause any fault, best bet a long nail put across lip at the top for spring to hang on just to test. chec connections on door mod.Re: Miele W844 Nr00/48061841
Hi John,
This model should show a fault code if the programme aborts, this is normally signified by flashing leds. If you can post the fault on here I should be able to help you or I can send you info in e-mail if you need it.Re: Miele W844 Nr00/48061841
Seamy, Will get info for you a.s.a.p. and post on this site, not sure what the led code is until I check it out.
Cheers john.Re: Miele W844 Nr00/48061841
seamy, customer tells me the rinse light was flashing like mad?? when adorted. hope this helps John.
Re: Miele W844 Nr00/48061841
rince light is carbons check wire plug to motor and wires running along right side chassis to module.
- You must be logged in to reply to this topic.