ariston L64x aus DW

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #30461
    ramman
    Participant

    hello people,
    ariston dishwasher model L64X aus fills and drains at the same time.

    the fill cycle starts and than it starts to drain and the drain pump keeps on going.
    removed the outlet hose to check and found that the fill cycle is also on as bucket kept on filling.

    any suggestions as to what could be causing it.
    thanks
    ramma

    #227291
    iadom
    Moderator

    Re: ariston L64x aus DW

    Unfortunately as you are not exactly round the corner 😉 your Australian model number does not match our UK model identification software.
    One possibility if you are using 3 in 1, 4 in 1 or even 5 in 1 tablets is that the machine has overflowed into the base. With the machine unplugged, place a few towels on the floor and tilt the machine to one side. If water does run out then allow it to dry and try again. If the fault comes back within one or two cycles then you may have an internal leak.

    It is better to use separate detergent, salt and rinse aid.

    I will move your post to the Oz forum, you may get some answers from nearer home. 😉

    Jim.

    #227292
    bigsmokepiker
    Moderator

    Re: ariston L64x aus DW

    As Above Check for Water in Base
    If Water In base Could be Due a leak Or Over Detergent useage
    Jim Is Spot On About Tablets
    They cause more problems than what they’re worth.
    If you do use remember not to fill rinse aid container & cut tablets in Halve

    #227293
    ramman
    Participant

    Re: ariston L64x aus DW

    thanks for the info,
    there was water in the base. tilted the mc and now it works fine.
    if it stops again will have to look underneath to see where it is leaking from. thats for later
    thanks
    ramman

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.