Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › LG GRL207DVZA
- This topic has 12 replies, 3 voices, and was last updated 18 years, 7 months ago by
Alanj.
-
AuthorPosts
-
September 12, 2007 at 5:13 pm #30501
Alanj
ParticipantHi Guys,
customer has this american f/f, problem is with the ice dispenser not dispensing ice, it is making ice. Customer says that LED display on door front usually goes out when you close the door but is not going out now. Is this anything to do with ice dispenser not operating ie freezer thinks door is still open? Hope someone can help. 😕
Alanj
September 12, 2007 at 5:55 pm #227417helo_75
Participantpeel the door seal back when the doors closed, and see if the light is on
unusual, cos normally, it would melt the ice
more likely to be a pcb fault in fairness
September 12, 2007 at 6:20 pm #227418BobHope
ParticipantRe: LG GRL207DVZA
Hi Alanj,
ive emailed you some info,
hope it helps.
Bob.September 13, 2007 at 10:39 am #227419Alanj
ParticipantRe: LG GRL207DVZA
Thanks for the info lads,much appreciated.
Alanj
September 13, 2007 at 1:47 pm #227420Alanj
ParticipantRe: LG GRL207DVZA
Hi Guys,
went to see this F/F today. Dispenser only dispensing water and display is on all the time. Is the problem likely to be with the door switch or one of the modules? Door switch does switch light off when closed. 😕
Alanj
September 13, 2007 at 7:19 pm #227421Alanj
ParticipantRe: LG GRL207DVZA
Has anyone got an idea on this fault? 😥
Alanj
September 13, 2007 at 7:23 pm #227422BobHope
ParticipantRe: LG GRL207DVZA
Hi Alanj,
did you get my email. ?
Bob
September 14, 2007 at 10:01 am #227423Alanj
ParticipantRe: LG GRL207DVZA
Hi Bobhope,
I did get your e-mail, but find the LG manual a bit hard to follow.
Alanj
September 18, 2007 at 3:05 pm #227424Alanj
ParticipantRe: LG GRL207DVZA
Are there no refrigeration specialists with an answer to my problem?
Alanj
September 18, 2007 at 4:07 pm #227425helo_75
Participantits the pcb
September 18, 2007 at 6:00 pm #227426Alanj
ParticipantRe: LG GRL207DVZA
Hi helo_75,
is that the main pcb or the display?
Alanj
September 18, 2007 at 6:44 pm #227427helo_75
Participantthe main
September 24, 2007 at 7:07 pm #227428Alanj
ParticipantRe: LG GRL207DVZA
Hi Guys,
just to update you on this appliance. 😀 Have solved the problem – I removed hinge cover on top of door, disconnected the plug between main module and door display module for 30 secs then reconnected. Freezer is dispensing ice and crushed ice ok again. Can only assume something caused main module to lock up. 8)
Alanj
-
AuthorPosts
- You must be logged in to reply to this topic.
