- This topic has 4 replies, 4 voices, and was last updated 18 years, 7 months ago by
.
-
Posts
-
Ran a cycle water is circulating and top spray arm is rotating ok..lower arm wont turn, there is not water being pumped through …can anyone tell me what to look for as I have never stripped these apart..and is it worth the cost as this machine is 7 years old.
Cheers JohnRe: Aeg Enr 911234124 D/W
Hi Rocker,
Do you have a model number?
Some of these AEG ‘s have a diverter valve on them that alternate the flow of water between bottom and top spray arms. could be it’s jammed or the motor powering it has gone.Alanj
Re: Aeg Enr 911234124 D/W
Pretty sure that model has the motor driven disc that directs the flow from the top arm to the bottom arm on rotation. More than likely drive field coil open circuit and the disc is stuck in the upper arm flow position.
Expensive because I think its all part of the circulating motor and therefore sold as one complete unit (not certain though)? However, in the passed i have managed to turn the disc so it is open between both – allowing flow to upper arm and lower at the same time! Powerful motor so even though apertures only half open should drive both arms round. Worked in the past for me 😀
Hope this helps,
Brian.
- You must be logged in to reply to this topic.