BELLING IDW 603 INT D/W (SERVIS CLONE)

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › BELLING IDW 603 INT D/W (SERVIS CLONE)

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • September 13, 2007 at 6:55 pm #30538
    goosegreen
    Participant

    Ordered hinges STV 082619089 And 088 plus the hinge cords for the above but found that the hinges are different from the originals as there is no ring to fit the cords to. The new hinges have a longer arm which looks like the spring fits directy on to. Would any one know if the hinges are an update and if so any part numbers would be appreciated.


    Goose

    September 13, 2007 at 7:19 pm #227553
    aqualectric
    Participant

    Re: BELLING IDW 603 INT D/W (SERVIS CLONE)

    Are you looking for the type fitted to the Hotpoint DF53? They have the cords and stirrup fittings. Put “hinge DF53” into Connections and have a look. 😉

    Hope that helps,

    Steve.

    September 13, 2007 at 7:41 pm #227554
    goosegreen
    Participant

    Re: BELLING IDW 603 INT D/W (SERVIS CLONE)

    Aqua, No this defo a Ardo/Servis clone the cords look a bit like the Brandt/Hotpoint one on connect but totally different.

    Goose

    September 14, 2007 at 8:24 am #227555
    goosegreen
    Participant

    Re: BELLING IDW 603 INT D/W (SERVIS CLONE)

    Turns out its the same as a Servis M4605AL which has 4 different hinges. Connect listed the R/H but was no stock on the left. In the end after spending 2 Hrs cross referencing found that a Baumatic BDW9 is the same machine so have ordered from them.


    Goose

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.