Ariston XF905 Built in Maxioven

Home › Forums › Public Support Forums › Spare Parts Help › Ariston XF905 Built in Maxioven

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • September 19, 2007 at 1:49 pm #30660
    shaun evans
    Participant

    Hi, the door hinges/springs on my Ariston XF905 Built in Maxioven have weakened, resulting in the door not sealing properly & therefore leaking cooking fumes & heat. The rubber seal is all ok. Are these hinges available & at what cost, & could it be a DIY job?

    Many thanks…….Shaun.

    September 20, 2007 at 4:55 pm #227989
    Dave_Conway
    Participant

    Re: Ariston XF905 Built in Maxioven

    There have been two types of hinge used on this model, we will need the Industrial Code from the oven rating plate starting with 7922…… please 🙂

    Dave.

    September 20, 2007 at 9:27 pm #227990
    shaun evans
    Participant

    Re: Ariston XF905 Built in Maxioven

    Hi Dave, and thanks for your reply. I think the number you need is…………. 79/22018/00/00. For your additional info the serial number is…..207120076.

    These numbers were taken from the sticker on the rear of the instruction book, and the 79/22018/00/00 number was prefixed by COD.

    Hope this helps……..Shaun Evans.

    September 20, 2007 at 10:40 pm #227991
    Dave_Conway
    Participant

    Re: Ariston XF905 Built in Maxioven

    That’s the one thanks Shaun 🙂

    I’ve added this hinge to our online shop here should you wish to order

    http://shop.ukwhitegoods.co.uk/product_ … ts_id=1796

    Please note the delivery time as this is not a stock item

    Dave.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.