Fagor/baumatic d/washer fault

Home Forums Trade Technical & Spare Parts Forums Trade Technical Enquiries Fagor/baumatic d/washer fault

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #30664
    PINKY
    Participant

    hi guys
    have this dishwasher with the following fault below but is not any of the suggested problems as per the error code bumpf.
    1 lit/1not/2 lit = Control card, element or safety stat
    these are flashing but in between flashes the 2nd light flashes

    all filling chamber/hose float etc checked. what happens is it fills then sprays for 10 seconds then spray pump stops for about 45 seconds then comes on again for 10 seconds.

    any ideas on this would be appreciated!

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.