Whirlpool Oven – AKZ451/IX/01 Wiring Query

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Whirlpool Oven – AKZ451/IX/01 Wiring Query

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • September 19, 2007 at 8:31 pm #30681
    Ethereal_Gaz
    Participant

    Hi,
    I’ve just bought this oven off Ebay and had it delivered today.

    I was hoping to arrange a local electrician to wire this up as I believe that’s now the law but have soon a potential wiring problem and don’t want to pay for more than one callout.

    The wires from the wall switch are the typical red, black and earth 6mm wires.

    The oven has a yellow/orange connector block with a light blue and white wire going into it from the oven PCB. There is also no apperent case earth point.

    Will I need to buy some sort of connector to connect this oven to the existing wires?

    Thanks

    September 19, 2007 at 9:07 pm #228037
    Penguin45
    Participant

    Re: Whirlpool Oven – AKZ451/IX/01 Wiring Query

    I *think* you have to remove the rear cover, as the terminal block is mounted on a cross member inside the oven.

    Penguin45.

    September 19, 2007 at 10:22 pm #228038
    Ethereal_Gaz
    Participant

    Re: Whirlpool Oven – AKZ451/IX/01 Wiring Query

    Spot on, you do. Thanks.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.