Indesit WIL113

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #30719
    oande
    Participant

    Hi we have an indesit WIL113 the time delay, stain removal and door closed lights flash constantly and the therefore the machine won’t work. Do you know what the error code is for this?

    #228165
    Penguin45
    Participant

    Re: Indesit WIL113

    L-R, 1-4, which ones are lit?

    Penguin45.

    #228166
    oande
    Participant

    Re: Indesit WIL113

    1, 2 and 5 i think

    #228167
    iadom
    Moderator

    Re: Indesit WIL113

    Neons 1+ 2 flashing suggest a communications error. The console PCB is not on speaking terms with the main power PCB.

    Could just be bad connections or faulty PCB/Module, both very common faults on these machines.

    Jim.

    #228168
    Martin
    Participant

    Re: Indesit WIL113

    oande wrote:1, 2 and 5 i think

    Light no5 doesn’t count in this case as that is the door lock light……just the 4 lights counting left to right if you please, no guessing now 😉

    In most cases when the lights (in your case no’s 1 & 2) come on and the door locks but no-one is at home, chances are the motor brushes are worn out? 😉 😉

    iadom wrote:Neons

    Your shop front may use neons Jim, not this machine though 😈

    #228169
    iadom
    Moderator

    Re: Indesit WIL113

    Martin wrote:

    oande wrote:

    Your shop front may use neons Jim, not this machine though 😈

    You leave my shop front alone, you never know what goes on behind the blinds. 😉 😆

    This machine would have had to have had a lot of stick to wear out the brushes as soon as this.

    Jim

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.