Zanussi DCE5655

This topic has 1 reply, 2 voices, and was last updated 18 years, 6 months ago by PGS.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
September 24, 2007 at 12:18 pm #30781

PGS
Participant

Called to above dishwasher today, which is pumping ok, fillig ok and heats for a while then aborts. When I reset prog the two top wash indicator neons flash 6 times (dunno if this fault code or not) Ive checked all hoses for blockages etc and all are A1 any help appreciated cheers Paul.

September 24, 2007 at 2:01 pm #228389

senseib
Participant

Re: Zanussi DCE5655

This m/c has a EDW1001 module fitted – a common fault is a dry joint at the heater connector on the board!

HTH,
Brian.
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.