Bosch oven HBN 49.0

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #30938
    MonkeyB
    Participant

    my oven door on my Bosch cooker wont close unless it is proped up. Any advice anyone?? or do i need a new door?

    #228996
    gegsy
    Participant

    Re: Bosch oven HBN 49.0

    Hi
    Are there anymore numbers off the rating plate?

    Greg

    #228997
    nomadPaul
    Participant

    Probably just the hinges required but as Mr G says , full model number required before spare part numbers can be established

    #228998
    MonkeyB
    Participant

    Re: Bosch oven HBN 49.0

    New hinges sound good, not sure what numbers you require so here are all of them!

    HBN 4950GB / 02
    FD8108
    ZN534686

    are these any good?

    #228999
    gegsy
    Participant

    Re: Bosch oven HBN 49.0

    How strange 😕 They only manufactured a HBN4950GB/01 😯
    If that is the one, as Mr NP says hinges 😉 p/no 483651 per hinge, available from spares@ukwhitegoods.co.uk 😀 approx £8 + the usual each.

    Greg

    #229000
    MonkeyB
    Participant

    Re: Bosch oven HBN 49.0

    just double checked, definatley an 02! 😕
    will the hinges fit? 😀

    #229001
    gegsy
    Participant

    Re: Bosch oven HBN 49.0

    No idea, only showing an /01. No other model at all, just the one 😕
    Maybe someone else has an idea on this :con:

    Greg

    #229002
    clivejameson
    Participant

    Re: Bosch oven HBN 49.0

    Have a closer look at the rating plate with good lighting, do you think the model could be HBN 49 S 0GB / 02 ?

    If so….

    RH Hinge 267593
    LH Hinge 267594

    click below to obtain them if they are required
    http://www.ukwhitegoods.co.uk/modules.p … =Help_Desk

    #229003
    gegsy
    Participant

    Re: Bosch oven HBN 49.0

    Nice one Clive 😉

    Greg

    #229004
    MonkeyB
    Participant

    Re: Bosch oven HBN 49.0

    yep its an S 😳

    thanks for your help i will order them
    😀

Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.